.jpg)
.jpg)
Ceramic Inserts
Suitable for high-temperature alloy milling and medium to high speed rough turning
2、AS series cutting tools
Suitable for high-speed and stable turning of high-temperature alloys
3、SN series cutting tools
Suitable for milling and rough turning of cast iron
4、DA series cutting tools
Suitable for precision machining and semi precision turning of cast iron
5、AT series cutting tools
Suitable for precision machining and semi precision turning of high hardness steel
6、ATQ series cutting tools
Stable working condition precision machining for medium to high speed precision machining
and semi precision machining of high hardness steel suitable for ductile iron
1、HL series cutting tools
1.1 Product Introduction
HL ceramic cutting tools, mainly composed of SiA ₁ ON, brown.
Suitable for high-temperature alloy milling and medium to high speed rough turning, with much higher efficiency than hard alloys.
1.2 Application Cases
Under the same cutting conditions, the surface quality of the workpiece processed by HL100 is comparable to that of similar imported tools, and the tool life is
close.
1.3、Recommendation usage
| Grade | 加工材料 Processing materials | 加工类型 Processing type | 线速度 Linear velocity (m/min) | 进给量 Feed rate (mm/rev) | 切深 Cutting depth (mm) |
| HL100 HL200 | Inconel718 GH4169 | Rough machining | 150~400 | 0.1~0.3 | 1.0~2.5 |
| Rough machining | 200~500 | 0.05~0.15 | 0.2~1.0 |
2、AS series cutting tools
2.1、Product Introduction
AS ceramic cutting tools, mainly composed of Al ₂ O æ, gray green.
Suitable for high-speed and stable turning of high-temperature alloys, its efficiency is much higher than that of hard alloys.
2.2、Application cases
Under the same cutting conditions, the wear appearance of AS100 and similar imported tools is basically the same, and the tool life is equivalent.
2.3、Recommendation usage
| Grade | 加工材料 Processing materials | 加工类型 Processing type | 线速度 Linear velocity (m/min) | 进给量 Feed rate (mm/rev) | 切深 Cutting depth (mm) |
| AS100 AS200 | Inconel718 GH4169 | Semi precision machining | 200~500 | 0.1~0.25 | 0.5~1.5 |
| Finish machining | 300~700 | 0.05~0.15 | 0.1~0.8 |
3、SN series cutting tools
3.1、Product Introduction
SN ceramic cutting tools, mainly composed of Si æ N4, gray.
Suitable for rough machining of materials such as cast iron, steel, and non-ferrous metals, with excellent toughness.
3.2、Application cases
Under the same cutting conditions, SN10 has more uniform tool wear, smaller wear, and longer tool life compared to similar domestically produced tools.
3.3、Recommendation usage
| Grade | 加工材料 Processing materials | 加工类型 Processing type | 线速度 Linear velocity (m/min) | 进给量 Feed rate (mm/rev) | 切深 Cutting depth (mm) |
| SN10 SN20 | 灰铸铁 Gray cast iron | Rough machining | 150~600 | 0.2~0.4 | 1.0~3.5 |
| Finish machining | 200~1000 | 0.05~0.3 | 0.2~1.0 | ||
| 特殊铸铁 Special cast iron | Rough machining | 150~400 | 0.15~0.3 | 0.8~2.0 | |
| Finish machining | 200~600 | 0.05~0.15 | 0.2~0.8 |
4、DA series cutting tools
4.1、Product Introduction
DA ceramic cutting tools, mainly composed of Al ₂ O3, white and pink.
Suitable for precision and semi precision machining of cast iron parts, with high efficiency.
4.2、Application cases
Under the same cutting conditions, the wear appearance of DA21 is basically the same as that of similar imported tools, and the tool life is equivalent.
4.3、Recommendation usage
| Grade | 加工材料 Processing materials | 加工类型 Processing type | 线速度 Linear velocity (m/min) | 进给量 Feed rate (mm/rev) | 切深 Cutting depth (mm) |
| DA21 | Gray cast iron | semifinishing | 150~500 | 0.1~0.3 | 1.0~3.0 |
| Finish machining | 200~600 | 0.05~0.25 | 0.2~1.0 | ||
| DA31 | 球墨铸铁 Ductile iron | semifinishing | 150~500 | 0.15~0.25 | 0.6~1.5 |
| Finish machining | 200~600 | 0.05~0.15 | 0.2~0.6 | ||
| DA41 | 合金铸铁 Alloy cast iron | semifinishing | 150~400 | 0.15~0.3 | 0.6~1.3 |
| Finish machining | 200~500 | 0.05~0.15 | 0.2~0.6 |
5、AT series cutting tools
5.1、Product Introduction
AT ceramic cutting tools, mainly composed of Al ₂ O3, with a black appearance color.
Suitable for high-speed precision machining and semi precision machining of materials such as bearing steel and quenched steel.
5.2、Application cases
Under the same cutting conditions, the wear appearance of AT10 is basically the same as that of similar imported tools, and the tool life is equivalent.
5.3、Recommendation usage
| Grade | 加工材料 Processing materials | 加工类型 Processing type | 线速度 Linear velocity (m/min) | 进给量 Feed rate (mm/rev) | 切深 Cutting depth (mm) |
| AT10 AT20 | hardened steel ≥HRC45 | semifinishing | 70~150 | 0.1~0.2 | 0.3~0.6 |
| Finish machining | 100~200 | 0.05~0.15 | 0.1~0.3 |
6、ATQ series cutting tools
6.1、Produc Introduction
ATQ ceramic cutting tools, mainly composed of Al ₂ O3 and TiC, with a black appearance color.
Based on the AT series, further improve the wear resistance of materials, used for precision machining of high hardness steel, with longer tool life! It can also be
used for precision machining and semi precision machining of ductile iron, with a lifespan comparable to that of similar imported cutting tools.
6.2、Application cases
For stable working condition precision machining of high hardness steel, the wear resistance of cutting tools is significantly improved, and the tool life is
significantly improved.
6.3、Recommendation usage
| Grade | 加工材料 Processing materials | 加工类型 Processing type | 线速度 Linear velocity (m/min) | 进给量 Feed rate (mm/rev) | 切深 Cutting depth (mm) |
| ATQ | Hardened steel ≥HRC45 | Finish machining | 120~250 | 0.05~0.12 | 0.1~0.3 |
| 球墨铸铁 Ductile iron | semifinishing | 200~400 | 0.2~0.4 | 1.0~2.0 | |
| Finish machining | 300~600 | 0.1~0.2 | 0.2~1.0 |
7、For more information, please refer to HYW Ceramic Cutting Tool Product Brochure.
SITE NAVIGATION
CONTACT US
Contact：Shu
Mobile phone：+86-18259466080
Address: #331, Xinglinwan Road 476,Jimei District, Xiamen City, Fujian Province, China
.jpg)